Bandwidth Control - Tenda 11N Wireless Broadband Router User Manual

11N Wireless Broadband Router User Guide
or you want to use it to amplify wireless signals.
SSID: SSID (Service Set Identifier) is the identity of the wireless device. You can only
access to the ISP' network by entering the correct SSID, namely the SSID of the ISP's
wireless device. You can click the "Open scan" button to let the router automatically
search the ISP's available SSID. The SSID can also be the SSID of the superior wireless
device when using wireless bridge.
MAC: To connect to the ISP's wireless device, you need to know the device's MAC
address. You can click the "Open scan" button to let the router automatically search the
wireless device's MAC or superior wireless device's MAC.
Channel: The wireless device's communication channel. You must select the same
channel as the ISP's wireless device to enable their communications. It can also be
scanned by clicking the "Open scan" button.
Security mode: When the ISP wireless device is secured, the access device should set
the same security mode, encryption mode and key as the ISP' wireless device.
For example
If your ISP wireless device's SSID is "wireless", then just enter the ISP's SSID, wireless
MAC address, and channel respectively into the corresponding fields of the above
picture. If the ISP device is secured, please set your router's encryption type the same
as the ISP device's .Or you can click the "Open scan" button to let the router
automatically fill in the SSID, Channel and wireless MAC. After saving, come back to the
WAN Setting screen to select the corresponding WAN connection type to complete the
settings (For example, if your ISP wireless device's connection type is dynamic IP, just
select DHCP).

4.6 Bandwidth Control

Bandwidth control is used to limit the communication traffic of LAN computers when
accessing the Internet. It can simultaneously control maximum of 254 PCs' traffic. In
addition, IP address range configuration is supported.
21