Wep Setup - Belkin WRE/AP User Manual

Using the Web-Based User Interface

WEP Setup

64-Bit WEP Encryption
1.
Select "64-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually, or you can type in a passphrase
in the "Passphrase" field and click "Generate" to create a key. A hex
(hexadecimal) key is a mixture of numbers and letters from A–F and
0–9. For 64-bit WEP, you need to enter 10 hex keys.
For instance:
AF 0F 4B C3 D4 = 64-bit WEP key
3.
Click "Apply Changes" to finish. Encryption in the Wireless Router or
Access Point is now set. Each of your computers on your wireless
network will now need to be configured with the same security
settings.
WARNING
: If you are configuring the Wireless Router or Access Point from
a computer with a wireless client, you will need to ensure that security is
turned ON for this wireless client. If this is not done, you will lose your
wireless connection.
29 29 29
1
2
3
4
5
6
7