Setting Or Changing The Start Delay - AEG ÖKO FAVORIT 60850 i User Instructions

Operating Instructions
Interrupting the dishwashing cycle by opening the dishwasher door
Hot steam may escape when the door is opened. There is a risk of scald-
1
ing. Open the door carefully.
0 1. Open the door of the dishwasher.
The dishwashing cycle will stop.
2. Close the door.
The dishwashing cycle will continue.
Aborting the dishwashing cycle (RESET)
0 1. Press the function buttons 1 and 2 simultaneously and keep them
pressed.
The cycle display for the current cycle will flash for several seconds and
then cease to be illuminated.
2. Release the function buttons.
The dishwashing cycle has been aborted.
Turning off the dishwasher will only interrupt a selected dishwashing
3
cycle, not abort it. The dishwashing cycle will recommence after turn-
ing the dishwasher back on again.

Setting or changing the start delay

Using the start delay timer you can adjust when within the next 19
hours the dishwashing cycle is to begin.
Setting the start delay:
0 1. Press the ON/OFF button.
2. Continue pressing the DELAY TIMER button
of hours of delay until the dishwashing cycle is to start is flashing in
the multi-display.
3. Press the button for the desired dishwashing cycle.
The length of the selected dishwashing cycle will flash for a moment in
the multi-display, and then it will display the selected starting time
again.
As soon as the number of hours is displayed without flashing, the start
delay has been activated.
The dishwashing cycle will start automatically following a countdown
of the hours set.
28
until the number
Z