Table of Contents
Advertisement
Make sure that the water inlet hose, the drain hose and the mains cable are not bent or
squashed, when you insert the appliance.
Adhesive steam protection foil
Fit the steam protection on the front part of the
kitchen counter along the entire width.
Adjusting the height of the appliance
1.
Remove the adjustable plinth.
2.
– To lift the front of the appliance, turn
the two front feet counterclockwise.
– To lift the rear of the appliance, turn
the middle screw counterclockwise.
Adjusting the level of the appliance
A correct adjustment of the level of the appliance allows the door to close and seal correct-
ly. .
If the door does not close correctly, loosen or tighten the adjustable feet to level the appli-
ance.
After the adjustment of the level of the appliance, assemble the adjustable plinth on the
appliance.
27
Installation
Advertisement
Table of Contents
