Electrolux EUF29411W User Manual page 13

7. Remove the cover on the front (d).
8. Unscrew and move the door stopper (e)
to the opposite side.
9. Unscrew and move the hinge (f) to the
opposite side.
10. Unscrew the lower hinge. Move the pin
to the other side. Screw on the lower
hinge on the opposite side.
11. Tighten the pin with the adjustment
spanner supplied.
12. Reassembly the door.
13. Screw on the hinge pin (b) on the oppo-
site side.
14. Reassembly the covers (c) and (d) and
the front cover (a).
15. Raise the appliance and install the ven-
tilation grille.
16. Unscrew the handle. On the opposite
side remove the hole covers by driving a
3-4 mm drift or drill into them. Install the
handle. Fit the handle on to the opposite
side by turning it one half circle.
Install the hole covers provided within the
accessory bag.
17. Put the cabinet in position.
Warning! Reposition, level the
appliance, wait for at least four hours
and then connect it to the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is
cold (i.e. in Winter), the gasket may not
fit perfectly to the cabinet. In that case,
wait for the natural fitting of the gasket.
electrolux 13