Hctr Cal Cc Nnect Ons; Atachrng Th. Exter Sion Plate - White 310 Operator Instructions Manual

ELECTRICAL CONNEC
TIONS
Insert the plug with the inden
tations on the underside into
the socket on the right side of
the machine. The plug will
only go in one way. Place the
foot control in such a position
that your foot rests comfort
ably on
it.
Insert the plug into
a wall outlet, 110—1 20V.
flhen not in use, keep the plug
Jisconnected from machine,
ATTACHING
EXTEN
SION PLATE
To change
to
fiat sewing
surface, place extension plate
as follows.
1, Turn down the extension
plate support legs (A> with
the left hand.
2.
Pull the lock lever (B> and
turn it up to the left.
3.
Tilt the extension plate
down to enter the pin (C)
in the corresponding hole
(D) at the rear side free
arm.
.
Turn the lever (B) down to
the right to set the pin
into front hole (E).
\Jote:
In
case of sewing
tubular areas, detach
the
extension
plate
for free arm sewing.
5