Threading The Chain Stitch Needle (Orange); Thread The Top Cover Thread Guide By Pulling - Singer 14T968DC Instruction Book

Thread the eye of the right needle 9.
Note: Use of tweezers in the accessory case will
make needle eye threading easy.
The position of the thread must be behind the thread
guide.
Draw about 10cm(4 inches) of thread through
needle eye towards the rear of machine.
Place the thread to the back, under the presser
foot.
5) Threading the Chain Stitch Needle
(D on needle clamp)
Thread the left needle as indicated 1~9.
Raise Presser foot
to release Tension discs.
Pass thread from back to the front through the
thread guide 1.
Thread the top cover
Thread guide by pulling
the thread towards the
left until it slips under
guide. Then pull thread
along the right side of
button as illustrated.
(Orange)
by lowering presser bar lifter
2
1
6
7
8
9
1
23
9
2
3
5
4
2