Table of Contents
Advertisement
If the fault is displayed again, please contact the Customer Care De-
partment and inform them of the fault code.
Malfunction
The cycle indicator for the
selected dishwashing cycle
is flashing:
the control indicator WA-
TER is lit,
fault code
played in the multi-display
(Problems with water in-
let).
The cycle indicator for the
selected dishwashing cycle
is flashing,
fault code
played in the multi-display
(there is water in the dish-
washer's internal dispens-
er).
Fault code
played in the multi-dis-
play.
The control indicator FIL-
TER is lit.
26
Water tap is blocked with
limescale or faulty.
The tap is turned off.
The filter (where present) in
the threaded hose fitting
on the tap is blocked.
Å 10
is dis-
Filters in the base of the
washing compartment are
blocked.
Water inflow hose
has not been correctly posi-
tioned.
The sink outlet is blocked.
Å 2 0
is dis-
Water drain hose
has not been correctly posi-
tioned.
Å 30
is dis-
The anti-flood system has
been triggered.
The indicator FILTER is there
to remind you to check the
dishwasher's filters occa-
sionally and to clean them,
if necessary. It lights up at
regular intervals, regardless
of how clean the filters are.
Possible cause
Remedy
Check the water tap and
have it repaired if necessary.
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
dishwashing cycle that has
started;
then abort the dishwashing
cycle (see section: Starting
a dishwashing cycle);
clean filters (see section:
Cleaning the filters).
Check the position of the
hose.
Clean out sink outlet.
Check the position of the
hose.
First shut off the water tap,
then switch off the appli-
ance and contact the Cus-
tomer Care Department.
The indicator goes out auto-
matically at the start of the
next dishwashing cycle.
Hide quick links:
Advertisement
Table of Contents
