Honda EB10000 Owner's Manual page 65

2. Pull out the carburetor drain tube end under the fan cover of the
engine, and place it in a suitable container.
3. Remove the air cleaner cover (see page
4. Loosen the carburetor drain screw.
If the drain screw is difficult to loosen, wrap duct tape around the
screwdriver stem until the diameter becomes 8 mm as illustrated so
that you can loosen easily.
5. Drain the gasoline from the carburetor into the container.
6. Tighten the carburetor drain screw securely.
7. Install the air cleaner cover (see page
CARBURETOR DRAIN SCREW
46 ).
47 ).
CARBURETOR DRAIN TUBE
STORAGE
DUCT TAPE
63