Metronome - Korg SQD-8 Owner's Manual

®
Setting and changing MIDI channel
o
This function is used to select MIDI
channels for the tracks so that many MIDI
instruments can be controlled simulta-
neously by the SQD-8 with each unit
receiving data on only one MIDI channel.
Be sure MIDI channel selection of Devices
correspond with MIDI channel setting on
SQD-8.
o
Each of the MIDI channels from 1 to 16 on
the SQD-8 can be selected for each track.
(one channel per track)
1. Push MIDI-CH key 0.
2. Push Track key (1-8) to select MIDI
channel display.
3. Use Data Slider to change MIDI channel.
MIDI-CH
f
I
: ' TR
,- I
:J
CH
4. Push another track key 0-8) to select
next MIDI channel display.
5. Use Data Slider to change MIDI channel.
Push MIDI-CH key again after settings or
changes are finished.
*
In the following cases neither setting nor
changing is available.
During playing (when already started) ...
Set or change MIDI channel after pushing
START/STOP (
~
/ • ) key
ID.
During recording (when already start-
ed) ... The same as above.
In utility-function mode ... First push
function select key to change to another
function.
@ Push START/STOP (
~
/ . ) key.
Measure indication shows -8 in case of
4/4
and -6 in case of 3/4. N/4 means that
count starts. (before 2 measures).
Metronome starts to sound. TEMPO LED
@)
flashes with red for the first accent and
green for the alternate counts.
*
Tone of metronome can be monitored with
headphone. (headphone jack
fl)).
*
Please conduct the following operation when
metronome is not required.
1.
Push Function select key after the
operation
®
to set function mark (
~
) to
utility. "REC" display (utility-function)
stops flashing.
OD
PLAY
REAL TIME REC
STEP REC
ERASE
~
UTIliTY
2. Push metronome key (track key0) and
confirm that
*
on track 0 display has
disappeared.
3. Push function select key
f)
to return to
real time recording function.
®
Move data slider
m
to get right tempo.
(J)
Push START/STOP (
~
/ . ) key
ID.
@ Continue to push REW (
~
) key
4D
until
measure indication returns to O.
*
Omit operations @,
®, 0,
and @, if no
confirmation of tempo is required.
®
Push START/STOP (
~
/ . ) key
ID
to start
recording.
Once data is input, "REC" display, which
was flashing, remains lit. If you begin
recording and play MIDI keyboard and
"REC" continuous to flash no data is
being received by track. Please check
MIDI channel assignment to ensure SQD-
8 track and MIDI keyboard are set to the
same channel.
-7 -