Advertisement
7. Convection Cooking
This oven can be used as a convection
oven and can be programmed to reach a
desired temperature for pre-heating. The
temperature setting will default to 230
°C, you may press "
different temperature.
Example: To set the oven to pre-heat to
200 °C.
a) Press the "
" button to choose
200 °C temperature
b) Press " ".
When the pre-heating is completed,
the appliance will stop work and emit 2
bleeps to remind you to place the food
in the oven. Set the convection cooking
temperature and time and start cooking.
The longest preheating time will be 30
minutes.)
II Convection fumction
Example: Convection cooking, To set the
pre-heated oven to cook for 20 minutes
at 200 °C
a) Press "
" button to choose con-
vection cooking, press "
choose 200 °C temperature.
b) Set cooking time for 20 minutes
c) Press " ".
8. Clock
The oven can be used as a clock. Ex-
ample: to input current time 16:30
A) Press " ", the clock symbol will flash
in display. Rotate the "Time setting" knob
to set "16:00".
B) Press " " again, rotate the "Time set-
ting" knob to set "16:30"
C) Press " " again, the clock setting
is finished, the time start to go on work-
ing.
" button to set the
" button to
9
9. Timer
The timer function helps the microwave
oven begin automatic cooking at set
time, and automatically stop operation
after finishing cooking. (You should set
the clock before using timer function).
Example: the current time of microwave
oven is 16:30, to set cooking at 18:15 on
70% power for 10 minutes.
a) Press " " and set time to 18:15 (same
procedure as setting clock).
b) Press "
" to set 70% power.
c) Input cooking time 10 minutes by
rotating the knob "Time Setting".
d) Press " ".
If you don't set power and cooking time
(omit B and C steps), and directly press
" " button, the microwave oven will
work only as a clock, there will be 10
beeps at 18:15, but no other function will
run.
10. Child-safety lock
To activate the child safety lock, press
"
" and "
" button at the same time
for 2 seconds. Press "
button, at the same time for 2 seconds
again, it will unlock this function.
11. Pause/Cancel
a) In the course of operation, pressing
" " button will stop operation.
b) If any program was set before press-
ing start, pressing this button will cancel
all the set program.
EN
" and "
"
Hide quick links:
Advertisement
