Blis* (Blind Spot Information System) - Operation - Volvo V70 Owner's Manual

Overview
Rearview mirror with BLIS function
BLIS camera
Indicator lamp
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehi-
cle. If the car is overtaken on both sides at
the same time then both lamps illuminate.
Maintenance
In order to work most effectively the BLIS
camera lenses 35 must be clean. The lenses
can be cleaned with a soft cloth or damp
34 NOTE: The illustration is schematic - details may vary depending on car model.
See (1) in the preceding illustration.
35
sponge. Clean the lenses carefully so that
they are not scratched.
IMPORTANT
The lenses are electrically heated to melt
ice or snow. If necessary, brush snow
away from the lenses.
Related information
•
BLIS* (Blind Spot Information System) -
operation (p. 241)
34 .
07 Driver support
BLIS* (Blind Spot Information System)
- operation
BLIS (Blind Spot Information System) is a
function designed for providing support for
the driver when driving in dense traffic on
roads with several lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started.
The indicator lamps in the door panels flash
three times when BLIS is activated.
Button for activating/deactivating.
The system can be deactivated/activated
after starting the engine with one press on the
BLIS button.
Some combinations of the selected equip-
ment leave no vacant space for a button in
the centre console - in which case the func-
*
Option/accessory, for more information, see Introduction.
07
241