Volvo V70 Owner's Manual page 110

03 Instruments and controls
||
Functions
Oil level A
Messages (##)
Certain engines.
A
Headings
03
One of the headings in the following table can
be selected for constant display in the com-
bined instrument panel. Proceed as follows to
determine which:
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
2 presses on RESET.
Trip computer heading in combined instrument
panel
T1 and total dist.
Trip meter
T2 and total dist.
Trip meter
Distance to empty
Fuel consumption
Average speed
No trip computer information.
The combined instrument panel's trip com-
puter can be changed to another option at
108
Information
For more information, see Engine oil - checking and filling (p. 331).
For more information, see Messages - handling (p. 104).
2. Turn the thumbwheel - selectable head-
ings for the trip computer are shown in a
loop.
3. Stop on desired heading.
Information
•
Long press on RESET resets trip meter T1.
•
Long press on RESET resets trip meter T2.
For more information - see the section "Range - distance to empty tank" (p. 113).
Current consumption.
•
Long press on RESET resets
This option shows a blank display - it also marks the beginning/end of the loop.
any time during the journey. Proceed as fol-
lows:
Average speed
.
– Turn the thumbwheel - stop on the
desired heading.