Sirius Radio Operation - Jensen JMS2212 Operation Manual

SIRIUS RADIO OPERATION

1
4
3
2
8
9
10
11
12 13 14 16 17 15
NOTE: SIRIUS is available in the US for subscribers with addresses in the continental
US and is available in Canada for subscribers with a Canadian address. Required
subscription plus compatible SIRIUS tuner and antenna are required and sold
separately. To subscribe to SIRIUS Satellite Radio on the internet, visit sirius.com, or
call 888-539-7474. Have your SIRIUS ID ready (SIRIUS ID is located on the back of the
SIRIUS tuner or by tuning to Channel 0). SIRIUS programming is subject to change. Visit
sirius.com for the most complete and up-to-date channel lineup and product
information. "SIRIUS" and the SIRIUS dog logo and related marks are trademarks of
Sirius Satellite Radio Inc. All rights reserved.
Switching to SIRIUS Satellite Radio
(Requires optional SIRIUS tuner)
Press the MODE button (8) as many times as necessary to change the mode to SIRIUS radio
mode.
Accessing your SIRIUS RADIO ID
To display your SIRIUS radio ID, use the SEEK |<< button (13) to tune to channel "000". The
screen will display "SIRIUS ID" with the SID displayed in the middle of the LCD screen. The
SIRIUS radio ID is 12 characters long.
Selecting a Band
In SIRIUS mode, press the BAND/WB button (9) to access the SIRIUS user-preset channel
groups in the following order: SR1, SR2, SR3.
Category Tuning
JMS2212
1. Press the PTY/CAT/MENU button (21) to access Category mode.
2. While in category mode, press SEEK >>|/CAT+ or SEEK |<</CAT- buttons (15, 13) to
5
choose a category.
3. Press the VOL +/- buttons (17, 16) to choose desired channels in that category. (The
6
50Wx4
current channel number within the chosen category will always be the default first channel
tuned.)
7
4. Press the INFO/ENTER button (14) to play the highlighted channel and return to channel
tuning mode.
18
Channel Up/Down Tuning
19
Press the SEEK |<< / >>| buttons (13, 15) to search for a channel. Press and hold the SEEK
buttons to fast search.
20
Direct Tuning Mode
21
1. Press and hold the INFO/ENTER button (14) to enter direct tuning mode.
2. Press VOL +/- buttons (17, 16) to change the first of three digits for the desired channel in
the direct entry screen.
3. Press the INFO/ENTER button to confirm the entered digit and move to the second digit
field.
4. Press VOL +/- buttons to select the second digit.
5. Press the INFO/ENTER button to confirm the entered digit and move to the third digit
field.
6. Press VOL +/- buttons to select the third digit.
7. Press the INFO/ENTER button to confirm the three digit channel and tune to the selected
channel.
Storing Preset Channels
The preset buttons (1-6) can be used to store 6 channels, allowing convenient access to your
favorite channels.
Programming Channels
1. Select the channel you want to store in memory.
2. Press and hold a 1-6 preset button until the corresponding preset button number appears.
3. Repeat steps 1 and 2 to program additional channels.
Preset Recall
Press one of the six preset buttons to directly select a preset channel stored in the current
band.
Preset Scan
Press AS/PS/FAV button (10) to scan stations stored in all three user-preset channel groups
(SR1, SR2 and SR3). The unit will pause for 10 seconds at each preset station. Press AS/PS
again to stop scanning when the desired station is reached.
10
JMS2212