Page 1
MS40BT HEAVY DUTY AUDIO SYSTEM Installation and Operation Manual iPhone, iPod, iPod Classic, iPod Nano, iPod Shuffle, and iPod Touch are trademarks of Apple Inc., registered in the U.S. and other countries.
MS40BT CONTENTS Warnings and Compliance ......................1 Copyrights and Trademarks Introduction ..........................2 iPhone, iPod, iPod classic, iPod shuffle and iPod touch are trademarks of Apple Inc., registered Installation ..........................3 in the U.S. and other countries. Wiring ............................4 Basic Operation ........................
MS40BT WARNINGS AND COMPLIANCE Important Safety Instructions NOTE: Keep the volume level low enough to be aware of your surroundings. NOTE: USE THE PROPER POWER SUPPLY! This product is designed to operate with a 12 volt DC negative ground battery system.
MS40BT INTRODUCTION System Features Features of the Jensen MS40BT heavy duty audio system include: White LED Backlit LCD • iPx6 Waterproof • Low Battery Alarm • AM/FM US/EURO Tuner with 30 Presets (12 AM, 18 FM) • Weatherband with Weather Alert •...
MS40BT Secure the radio to the dashboard using #6 stainless steel pan head screws (not INSTALLATION provided). Replace the covers on either side of the radio. Before you Begin Test radio operation by referring to the operating instructions for the unit.
MS40BT should the unit display an error code. BASIC OPERATION You can recover factory default settings using the RESET function located in the system menu. With “Reset to Defaults?” flashing, press the INFO/ENTER button (18) to activate. Audio Menu Press the AUDIO/MENU button (3) on the control panel to access the audio menu. You can navigate through the audio menu items by pressing the AUDIO/MENU button repeatedly.
MS40BT a list of previously paired mobile phone device models. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for Bluetooth Pair (On/Off): Choose “INFO/ENTER” to automatically pair a device. • an extended period of time. In addition, the visibility of the numbers on the LCD may Bluetooth (On/Off): Choose “Bluetooth On”...
MS40BT TUNER OPERATION Automatically Store / Preset Scan (AS/PS Automatically Store Select an AM or FM band. Press and hold the AS/PS button (15) for more than two seconds to automatically select strong stations and store them in all bands. The new stations replace any stations already stored in that band.
MS40BT The Weather Alert function can be turned “on” or “off” by the Audio/Menu key, as described on WEATHER BAND OPERATION page three. When set to “ON”, the weather tuner remains active in the background, even when the radio is turned off (as long as the power is still applied to the radio). If a weather alert is...
MS40BT ID3 Support MP3/WMA OPERATION This unit supports ID3 tag versions 1.0, 1.1, 2.0 and 2.3 (Max 32 bytes). Installing a USB Device Insert your USB thumb drive into the USB connector routed from the rear of the radio. The unit will automatically search for MP3 and WMA files on the device and begin playback.
Page 12
MS40BT MP3/WMA Directory Search Press the BAND/SEARCH button (16) to enter directory search mode. The LCD will display the folder list for the current directory. Press the BAND/SEARCH button to view the folder directory list. Navigate the folder list by pressing the VOL +/- buttons (2).
MS40BT iPod OPERATION Turning the iPod On/Off The iPod power turns on automatically when an iPod is connected to the USB connector, as This unit is equipped with an iPod ready function that will allow you to control your iPod (if long as the vehicle ignition is turned on.
Page 14
MS40BT When search mode is selected, press the INFO/ENTER button (18) to confirm selection. Use the VOL +/- buttons (2) to navigate through various list selections. Press INFO/ENTER (18) to make your final selection. Use the AS/PS button (15) to reverse navigate the list.
5 devices are used, you must lock the device. To Make sure the device is on and ready to receive a signal from the MS40BT. With the Lock/Unlock a device, press the INFO/ENTER button to display/change the Locked MS40BT in BT Audio mode, choose BT Pair from the MS40BT menu and press the ( ) or Unlocked ( ) icon.
Page 16
MS40BT Bluetooth Audio (A2DP) The A2DP music is available for Bluetooth enabled phones when the phone is connected. To access Bluetooth mode and play songs stored on your phone, press the MODE button (4). While in BT mode , the BT Audio icon ( ) illuminates on the LCD.
MS40BT CARE AND MAINTENANCE Keep the product dry. If it does get wet, wipe it dry immediately. Liquids might contain • TROUBLESHOOTING minerals that can corrode the electronic circuits. Keep the product away from dust and dirt, which can cause premature wear of parts.