Table of Contents
Advertisement
2-7
MB Intelligent Tweaker (M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Configure DRAM Timing
x Cas Latency Setting
x DRAM RAS Active Time
x DRAM RAS Precharge Time
x DRAM RAS to CAS Delay
CPU Clock Ratio
Linear Frequency Control
x CPU Clock (MHz)
x DRAM Clock (MHz)
AGP/PCI Clock Control
x AGP Clock (MHz)
x PCI Clock (MHz)
: Move
Enter: Select
F5: Previous Values
Incorrect using these features may cause your system corrupted. For power users only.
Configure DRAM Timing
Auto
Manual
CAS Latency Setting
2T/2.5T/3T
Auto
DRAM RAS Active Time
4T/5T/6T/7T/8T/9T Set DRAM RAS Active Time to 4T/5T/6T/7T/8T/9T. (Default value:7T)
DRAM RAS Precharge Time
3T/2T/4T/5T
DRAM RAS to CAS Delay
3T/2T/4T/5T
CPU Clock Ratio (MHz)
This setup option will be automatically assigned by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Linear Frequency Control
Disabled
Enabled
GA-8S661GXMP(-C) Motherboard
MB Intelligent Tweaker (M.I.T.)
[Auto]
2.5T
7T
3T
3T
[16X]
[Disabled]
133
AUTO
[AUTO]
66
33
+/-/PU/PD: Value
F6: Fail-Safe Defaults
BIOS will automatically set up the DRAM Timing by DRAM SPD data.
(Default value)
This item allows user to set DRAM Timing manually.
Set CAS Latency to 2T/2.5T/3T (Default value is 2.5T).
BIOS will automatically detect CAS Latency.
Set DRAM RAS Precharge time to 2T/3T/4T/5T . (Default value:3T)
Set DRAM RAS to CAS Delay to 3T/2T/4T/5T. (Default value:3T)
Disable this function. (Default value)
Enable this function.
- 40 -
Menu Level
[AUTO]
Configure DRAM
Timing automatically
[Normal]
Configure DRAM
Timing by manual
Warning: Wrong DRAM
Timing may make
system can't boot.
Clear CMOS to overcome
wrong Timing issue
F10: Save
ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
Advertisement
Table of Contents
