Gigabyte GA-8S661GXMP User Manual page 35

Onboard LAN device*
Enabled
Disabled
USB Controller
Enabled
Disabled
USB Legacy Support
Enabled
Disabled
Onboard Serial Port 1
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard Serial Port 2
Auto
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Onboard Parallel Port
Disabled
378/IRQ7
278/IRQ5
3BC/IRQ7
Parallel Port Mode
SPP
EPP
ECP
ECP+EPP
ECP Mode Use DMA
This option is available only when Parallel Port Mode is set to ECP or ECP+EPP.
3
1
"*" Only for GA-8S661GXMP
Enable Onboard LAN device function. (Default value)
Disable this function.
Enable USB Controller. (Default value)
Disable USB Controller.
Enable USB Legacy Support.
Disable USB Legacy Support. (Default value)
BIOS will automatically setup the Serial port 1 address.
Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
Enable onboard Serial port 1 and address is 2F8/IRQ3.
Enable onboard Serial port 1 and address is 3E8/IRQ4.
Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disable onboard Serial port 1.
BIOS will automatically set up the Serial port 2 address.
Enable onboard Serial port 2 and address is 3F8/IRQ4.
Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value)
Enable onboard Serial port 2 and address is 3E8/IRQ4.
Enable onboard Serial port 2 and address is 2E8/IRQ3.
Disable onboard Serial port 2.
Disable onboard LPT port.
Enable onboard LPT port and address is 378/IRQ7. (Default value)
Enable onboard LPT port and address is 278/IRQ5.
Enable onboard LPT port and address is 3BC/IRQ7.
Use Parallel port as Standard Parallel Port.
Use Parallel port as Enhanced Parallel Port.
Use Parallel port as Extended Capabilities Port. (Default value)
Use Parallel port as ECP & EPP mode.
Set ECP Mode Use DMA to 3. (Default value)
Set ECP Mode Use DMA to 1.
- 35 - BIOS Setup