Installation Of Expansion Cards - Gigabyte GA-8IP775 Series User Manual

1-5

Installation of Expansion Cards

You can install your expansion card by following the steps outlined below:
1. Read the related expansion card's instruction document before install the expansion card into the
computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
Installing a AGP expansion card:
AGP Card
GA-8IP775 Series Motherboard
Please carefully pull out the small white-drawable bar
at the end of the AGP slot when you try to install/
Uninstall the VGA card. Please align the VGA card to
the onboard AGP slot and press firmly down on the
slot .Make sure your VGA card is locked by the small
white-drawable bar.
- 16 -