Gigabyte GA-8I865GMFK-775 User Manual page 37

SATA Port0 configure as
IDE Pri. Master
IDE Pri. Slave
IDE Sec. Master
IDE Sec. Slave
SATA Port0
SATA Port1
SATA Port1 configure as
The setting depends on "SATA Port0 configure as" item setting. (Default: SATA Port1)
USB Controller
Enabled
Disabled
USB 2.0 Controller
You can disable this function if you are not using onboard USB 2.0 feature.
Enabled
Disabled
USB Keyboard Support
Enabled
Disabled
USB Mouse Support
Enabled
Disabled
AC97 Audio
Auto
Disabled
Onboard H/W 1394*
Enabled
Disabled
Onboard H/W LAN
Enabled
Disabled
* Only for GA-8I865GMFK-775.
Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Primary Master.
Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Primary Slave.
Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Secondary Master.
Set SATA controller to compatible mode. This mode will remap SATA Port 0 to
IDE Secondary Slave.
Set SATA controller to native mode(Serial ATA mode - SATA Port 0). This mode
is only supported by Windows XP or later. (Default value)
Set SATA controller to native mode(Serial ATA mode - SATA Port 1). This mode
is only supported by Windows XP or later.
Enable USB controller. (Default value)
Disable USB controller.
Enable USB 2.0 controller. (Default value)
Disable USB 2.0 controller.
Enable USB keyboard support.
Disable USB keyboard support. (Default value)
Enable USB mouse support.
Disable USB mouse support. (Default value)
Auto detect AC97 audio function. (Default value)
Disable AC97 audio function.
Enable onboard IEEE1394 function. (Default value)
Disable this function.
Enable onboard H/W LAN function. (Default value)
Disable this function.
- 37 - BIOS Setup