Table of Contents
Advertisement
Press Enter to view and verify details. The Array Detail screen appears.
The Array Detail screen shows various information about the array that you selected, such as Striping Block
used, RAID Mode, Striping Width, Disk Model Name, and disk capacity.
RAID Mode: Mirroring
Striping Width : 1
Adapt
Channel
1
1
1
0
[R] Rebuild
If you want to mark this disk as empty and wipe out all its contents, press C.
At the prompt, press Y to wipe out all the data, otherwise press N.
Press Enter again to go back to the previous screen and then press Ctrl + X to exit the RAID setup.
Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load
drivers under Windows.
GA-K8NE-RH Motherboard
Array 2 : NVIDIA MIRROR 76.33G
- Array Detail -
Striping Block: 64K
M/S
Index
Disk Model Name
Master
0
Maxtor 6Y080M0
Master
1
Maxtor 6Y080M0
[D] Delete
[C] Clear Disk
- 70 -
Capacity
76.33GB
76.33GB
[ENTER] Return
Advertisement
Table of Contents
