Gigabyte AMD Socket 754 Processor Motherboard GA-K8NE-RH User Manual page 35

On-Chip MAC Lan
Auto Auto-detect onboard LAN chip function. (Default value)
Disabled Disable onboard LAN chip function.
NV IDE/SATA RAID function
Enabled Enable NV IDE/SATA RAID function.
Disabled Disable this function. (Default value)
NV Serial-ATA 1
Enabled Enable Serial ATA 1 supported. (Default value)
Disabled Disable Serial ATA 1 supported.
NV SATA 1 Primary RAID
Enabled Enable 1st SATA primary RAID function.
Disabled Disable this function. (Default value)
NV SATA 1 Secondary RAID
Enabled Enable 1st SATA secondary RAID function.
Disabled Disable this function. (Default value)
NV Serial-ATA 2
Enabled Enable Serial ATA 2 supported. (Default value)
Disabled Disable Serial ATA 2 supported.
NV SATA 2 Primary RAID
Enabled Enable 2nd SATA primary RAID function.
Disabled Disable this function. (Default value)
NV SATA 2 Secondary RAID
Enabled Enable 2nd SATA secondary RAID function.
Disabled Disable this function. (Default value)
IDE Prefetch Mode
Enabled Enable IDE Prefetch mode. (Default value)
Disabled Disable IDE Prefetch mode.
USB Memory Type
SHADOW
Base Memory(640K)
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
Onboard Serial Port 1
Auto BIOS will automatically setup the Serial port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 1.
Set USB memory type to SHADOW. (Default value)
Set USB memory type to base memory(640K).
- 35 - BIOS Setup