FujiFilm FINEPIX JZ500 Series User Manual page 3

-,'$ Removing Memory Cards
After confirming that the camera
is off, press the card in and then
release it slowly. The card can
now be removed by hand.
[l] Caution
The memory card may spring out if you remove
your finger immediately after pushing the card
in.
[!]Caution
Be sure card is in correct orientation; do not
insert at an angle or use force.
3
Close the battery-chamber cover.
3
Close the battery-chamber cover.
2
Insert the battery.
Insert the battery with the terminals first and
the orange stripe aligned with the orange
battery latch. Slide the battery into the
camera, keeping the battery latch pressed
to one side as shown below. Confirm that
the battery is securely latched.
Orange stripe
;::IJl
Battery latch
I
Inserting a Memory Card
1
Turn the camera off, and open the
battery-chamber cover.
2
Insert the memory card firmly until you
hear (feel) a click.
Holding the memory card in the orientation
shown below, slide it all the way in.
Turning the Camera On and
Off
Press the
ON/OFF
button to turn the camera
on. The lens will extend and the lens cover will
open.
Press
ON/OFF
again to turn the camera off.
r - - - - _ + _
Bottery
EN-2 ENGLISH