Bissell Spotbot 1200 series User Manual page 13

T
roubleshooting
Cleaner will not run
Possible Causes
1. Power cord not plugged in.
2. Blown fuse/tripped breaker.
3. Hose not removed from receiver.
Unusual or Odd Noise
Possible Causes
1. Clean/Solution tank is out of fluid.
Reduced or No Spray
Possible Causes
1. Spray Tip clogged on Tough Stain Brush.
2. Clean/Solution tank is out of fluid.
3. Clean/Solution tank is not inserted
into the unit securely.
No Suction
Possible Causes
1. Tank is full.
2. Dirty/Collection tank latch is not down.
3. Black Valve on the Dirty/Collection
Tank is missing.
Thank you for selecting a BISSELL product.
w w w . b i s s e l l . c o m
Manual/Hose Cleaning
Remedies
1. Check electrical plug.
2. Replace household fuse or
reset breaker.
3. Remove Hose.
Remedies
1. Fill Clean Solution Tank.
Remedies
1. Clean Spray Tip.
2. Fill Clean/Solution Tank.
3. Gently press the Clean/Solution
Tank until you see "bubbles"
coming from the base of the tank.
Remedies
1. Empty tank.
2. Push latch down, securely
into place.
3. Replace Black Valve into Dirty/
Collection tank.
13