Table of Contents
Advertisement
Push appliance into the housing until stop strip (A)
touches the kitchen unit.
A
D023
If after having carried out the previously described
operation there is still some space left between the
appliance and the kitchen unit, fit the trimming
A
provided together with the appliance on the stop
strip (A).
D265
Open the door and push the appliance against the
side of the kitchen unit opposite to that of appliance
hinges.
Fasten the appliance with 4 screws provided in the
kit included with the appliance. Snap vent grille (C)
and hinge cover (D) into position.
D
C
D723
Press in the joint covers between the appliance and
the kitchen unit.
D724
38
Advertisement
Table of Contents
