Electrical Connection; Door Reversibility - Electrolux END42395W User Manual

Electrical connection

Before plugging in, ensure that the
voltage and frequency shown on the
serial number plate correspond to your
domestic power supply. Voltage can
vary by ±6% of the rated voltage.
For operation with different voltages, a
suitably sized auto-transformer must
be used.
The a a ppliance m m ust b b e e e arthed.
The power supply cable plug is
provided with a contact for this
purpose.
If the domestic power supply socket is
not earthed, connect the appliance to
a separate earth in compliance with
current regulations, consulting a
specialist technician.
The M M anufacturer d d eclines a a ll
responsibility i i f t t he a a bove s s afety
precautions a a re n n ot o o bserved.
This appliance complies with
the following E.E.C. Directives:
87/308 E E EC of 2/6/87 relative to
•
radio interference suppression.
• 73/23 E E EC of 19.2.73 (Low Voltage
Directive) and subsequent
modifications;
• 89/336 E E EC of 3.5.89
(Electromagnetic Compatibility
Directive) and subsequent
modifications.

Door reversibility

The side at which the door opens can be
changed from the right side (factory
adjustment) to the left side, if the
installation site requires.
Warning! When changing the side
at which the door opens, the appliance
may not be connected to the mains.
Remove plug from the mains beforehand.
Procced a a s f f ollows:
To carry out the following operations, we
suggest that this be made with another
person that will keep a firm hold on the
doors of the appliance during the
operations.
Before carrying out any operations,
remove the plug from the power
socket.
1. Remove the upper hinge taking
care for the upper door not to fall
off and keep it for future actions;
2. remove the upper door;
3. Remove the upper support and
mount it in the opposite side
4. unscrew the middle hinge.(H)
Unscrew the plastic plugs located on
the opposite side of the central hinge
and introduce them in the holes
occupied before by the hinge;
electrolux 25