Conventions; Related Publications - Cisco Aironet 1200 Series Hardware Installation Manual

Conventions

Appendix C, "Console Cable Pinouts,"
that connects to the access point's serial console port.
Appendix D, "Channels and Antenna Settings,"
by the regulatory organizations.
Conventions
This publication uses the following conventions to convey instructions and information:
•
Note Means reader take note. Notes contain helpful suggestions or references to materials not contained in
this manual.
Means reader be careful. In this situation, you might do something that could result in equipment
Caution
damage or loss of data.
Warning The warning symbol means danger.
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. To see translations of the warnings that appear
in this publication, refer to Appendix A in this manual.

Related Publications

For more information about access points and related products, refer to the following publications:
•
•
•
•
Cisco Aironet 1200 Series Access Point Hardware Installation Guide, OL-2155-02
viii
Commands and keywords are in boldface type.
Quick Start Guide: Cisco Aironet 1200 Series Access Point describes how to attach antennas and
cables, mount the access point, and how to obtain access point documentation. This document is
included in the shipping box with your access point.
Cisco Aironet 1200 Series Access Point Software Configuration Guide describes the access point's
management system and explains how to configure the access point. This document is available on
the Cisco CCO web site at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/index.htm
Release Notes for Cisco Aironet 1200 Series Access Point describes features and caveats for access
points running firmware release XX.xx. This document is available on the Cisco CCO web site at
the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/wireless/airo1200/accsspts/index.htm
Cisco Secure Access Control Server for Windows 2000/NT Servers Version 3.0 User Guide provides
complete instructions for using Cisco Secure ACS, including steps for configuring Cisco Secure
ACS to support access points. This document is available on the Cisco CCO web site at the following
URL:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/csnt30/user/index.htm
describes the pinouts for the serial RJ-45 to DB-9 console cable
describes the channels and antenna settings supported
You are in a situation that could cause bodily injury. Before you
Preface
OL-7043-02