ActionTec GT724WG User Manual page 12

4. Right-click Local Area Connection.
5. From the dropdown list, select Properties.
6. Highlight Internet Protocol Version 4.
7. Select Properties.
8. Select Use the following IP address.
9. Use the information from your welcome letter to complete the configuration fields (IP Address, Subnet
Mask, Default Gateway, DNS).
Windows Vista:
1. Select the Start Circle. Then type "Network and Sharing" in the Start Search field.
2. Select Choose Network and Sharing Center.
3. Select View Status next to Local Area Connection.
4. Select Properties.
5. Highlight (do not uncheck) Internet Protocol TCP/IP Version 4.
6. Select Properties.
7. Set the computer to Use the Following IP Address.
8. Use the information from your welcome letter to complete the configuration fields (IP Address, Subnet
Mask, Default Gateway, DNS).
Windows XP:
1. Select Start, then Control Panel.
Note: If you do not see Control Panel, select Settings, then Control Panel.
2. Select Network and Internet Connections.
Note: If you do not see Network and Internet Connections, skip to Step 3.
3. Click Network Connections.
4. Right-click Local Area Connection, then select Properties.
5. Highlight (do not uncheck) Internet Protocol TCP/IP and select Properties.
6. Set the computer to Use the following IP Address.
7. Use the information from your welcome letter to complete the configuration fields
(IP Address, Subnet Mask, Default Gateway, DNS).
1-888-850-5915
Technical Support
Actiontec GT724WG Router
Setup and User Guide
11
103948/3-11/6960