Wacom Bamboo CTH-470 User Manual page 82

You suspect the tablet
preferences may be
corrupted, or want to make
certain that all settings are at
their factory defaults.
Ink does not work correctly
with the tablet.
Contents Index
Use the Bamboo Utility to work with preferences. Close any open
applications. Open the main A
B folder and run the B
AMBOO
• It is a good idea to first back up your tablet preferences. In the
Bamboo Utility, select C
B ... and follow the prompts.
ACKUP
• Then, delete the tablet preferences as follows:
Single user. When the utility starts, select C
R . Log out, then log back in. When the tablet driver loads it
EMOVE
will create a new preferences file with the factory defaults.
Multiple users. When the utility starts, select A
R . Log out, then log back in. When the tablet driver loads it
EMOVE
will create new preferences files with the factory defaults.
You can quickly restore tablet preferences that have been backed up
for the C
URRENT USER
utility.
Note: Do not manually remove the B
L
IBRARY
when uninstalling the tablet software driver, and then only when
using the B
There may be a problem with the Ink preferences. Remove the
damaged preference files as follows. They will be re-created when you
enable handwriting recognition.
1. Open S
YSTEM
turn off handwriting recognition.
2. From the G
P
REFERENCES
• .
COM APPLE
• .
COM APPLE
• .
COM APPLE
3. Go back to S
handwriting recognition.
4. Test the Ink function using your tablet and pen.
If this procedure does not resolve your problem with Ink, contact Apple
Support for further assistance. Wacom is not the software
manufacturer for Ink and we are limited in our abilities to support a third
party software application.
Contents Index
PPLICATIONS
U
AMBOO
U
URRENT
or A by clicking on R
LL USERS
AMBOO
P P folder. This file is only to be removed
REFERENCE ANES
U .
AMBOO TILITY
P , choose S
REFERENCES
menu, choose your H
O
folders. Remove the following preferences:
. . .
INK FRAMEWORK PLIST
. . .
INK INKPAD PLIST
. . .
INK INKPAD SKETCH
P
YSTEM REFERENCES
folder. Then open the
.
TILITY
or A . Then click
SER LL USERS
URRENT USER
LL USERS
... within the
ESTORE
. file from the main
PREFPANE
A and select I
HOW LL
. Open the L
OME IBRARY
and I , and then enable
NK
82
and click
and click
. Then
NK
and
82