Wacom Bamboo CTH-470 User Manual page 31

You can set the pen to position the screen cursor two different ways (see
• In pen mode, wherever you place the pen on the tablet, the screen cursor will jump to a corresponding
point on the display screen. The screen pointer indicates pen position, and follows the movement of the
pen across the tablet surface. This is the default setting for the pen.
16 mm (0.63 inch) proximity range
7 mm (0.28 inch) proximity
• In mouse mode you move the cursor with a "pick up and slide" motion similar to using a mouse.
Contents Index
Contents Index
setting the tablet
When positioning the screen cursor and operating a pen
button, the pen tip needs to be within 7 mm (0.28 inch)
of the tablet surface. The pen tip does not need to touch
the tablet in order to move the screen cursor or use a
pen button.
31
mapping).
31