Internal Connectors - Asus P5VDC-TVM SE User Manual

Hide thumbs Also See for P5VDC-TVM SE:
Table of Contents

Advertisement

Refer to the audio configuration table for the function of the audio ports in 2, 4,
or 6-channel configuration.
Audio 2, 4, or 6-channel configuration
Port
2-channel
Light Blue
Lime
Pink
8.
USB 2.0 ports 3 and 4. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
9.
USB 2.0 ports 1 and 2. These two 4-pin Universal Serial Bus (USB) ports
are available for connecting USB 2.0 devices.
10. VGA port. This 15-pin VGA port connects to a VGA monitor.
11. Serial connector. This 9-pin COM port is for serial devices.
12. PS/2 keyboard port (purple). This port is for a PS/2 keyboard.
1.8.2

Internal connectors

1.
Floppy disk drive connector (34-1 pin FLOPPY1)
This connector is for the provided floppy disk drive (FDD) signal cable. Insert
one end of the cable to this connector, then connect the other end to the
signal connector at the back of the floppy disk drive.
Pin 5 on the connector is removed to prevent incorrect cable connection when
using an FDD cable with a covered Pin 5.
P5VDC-TVM SE Floppy disk drive connector
ASUS P5VDC-TVM SE
Headset
4-channel
Line In
Rear Speaker Out
Line Out
Front Speaker Out
Mic In
Mic In
6-channel
Rear Speaker Out
Front Speaker Out
Bass/Center
FLOPPY1
NOTE: Orient the red markings on
the floppy ribbon cable to PIN 1.
PIN 1
1-23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents