Front Panel Display; Adjusting The Brightness Of The Display; Examples Of Displays During Operation - Denon DVD-1800BD Owner's Manual

Introduction

Front Panel Display

1
• Brightness of the display can be adjusted. Refer to "Panel Display" in "Function Setup" on page 19.
1. Displays playback status icon. Refer to the table below.
2. Displays various kinds of information such as title number, elapsed playing time, repeat
type, menu type, etc.
Playback Status Icon
Disc SD Memory Card
—

Adjusting the Brightness of the Display

You can adjust the brightness of the display by pressing [DIMMER] repeatedly. The brightness
changes as bright dimmer auto each time you press [DIMMER]. If you select auto, the display
gets dimmer during playback.
Note
• [DIMMER] is not available when the setup menu is displayed.
• [DIMMER] is not available while the pure direct mode is active.
2
Mode
Playback is in progress
Stop mode
Pause mode
Fast forward mode
Fast reverse mode
Slow forward mode
Appears while repeat function is set

Examples of Displays during Operation

Display
Power on
Standby mode
Tray open
Tray is closing
Loading the disc
No disc inserted
No SD Memory Card inserted
This unit cannot read the disc or SD Memory Card inserted.
Stop mode.
Pure direct mode is set to pure direct off.
Pure direct mode is set to front panel display off.
Pure direct mode is set to video signal off.
Pure direct mode is set to video signal and front panel display off.
The total number of the track that has been registered for the
programme playback and track number currently selected.
The total number of the files that has been registered for the
programme playback and folder/file number currently selected.
"All Clear" for programme playback setting is selected.
Note
• When the pure direct mode is set to "Disp.Off" or "All Off", the front panel display gets dimmer in
stop mode.
9
ENGLISH
ENGLISH
Introduction
Description