Installing The Camera With Windows Vista - Olympus SC30 User Manual

Appendix II: Installing the camera

Installing the camera with Windows Vista

SC20
SC30
XM10
XC10
UC30
XC30
UC50
XC50
Warning
The following step-by-step instructions describe the installation procedure for the
getIT software under the Microsoft Windows Vista operating system. These
instructions apply for the following Olympus light microscopy cameras:
SC20, SC30, XM10, XC10, UC30, XC30, UC50, XC50.
Installing the image acquisition software getIT
Install the image acquisition software before connecting your camera to your PC.
This is necessary so that the operating system does not install the wrong TWAIN
camera driver.
1)
Place the CD that has been supplied into the CD-ROM drive.
The installation program will start automatically - unless you have
deactivated the autorun function. If so, please start the setup.exe file
manually.
2)
If Microsoft Windows Vista opens the
box, click the Run
Microsoft Windows Vista will automatically switch to the Security
Desktop.
3)
Click the Allow entry to start the installation.
Before the installation can be started you will possibly have to prove
your authorization.
Open File - Security Warning
button.
dialog