Auto Mode Skip Setting - Mitsubishi Electric PAC-YT51CRB Operation Manual

• When the temperature beyond the temperature setting range is set, the set temperature display flashes.
* The temperature range can be set from the centralized remote controller that has the function of temperature
range setting via this Simple MA Controller connected with the indoor unit that has the function of temperature
range setting.

Auto Mode Skip Setting

This function allows to enable or disable the Auto mode.
Auto mode skip setting is only available for the controllers connected with heat pump air conditioners with
Auto mode.
1 Press the I [ON/OFF] button to stop the air conditioner.
2 Press the D [TEMP. (
P Auto mode skip. (The current setting will be displayed.)
3 Auto mode can be enabled or disabled by pressing the I [ON/OFF] button.
4 Press the D [TEMP. (
plete Auto mode skip setting.
)] and D [TEMP. (
)] buttons simultaneously for 3 seconds or longer to set the
ON - Auto mode is enabled.
OFF - Auto mode is disabled.
)] and D [TEMP. (
)] buttons simultaneously for 3 seconds or longer to com-