Table of Contents
Advertisement
Using the fridge
To start the fridge and set the
correct temperature
Switching on:
Switch on the fridge by pressing the power switch.
Setting the temperature
Press the buttons until the desired temperature
flashes in the temperature display (The temperature
can be set between +2°C and +8°C.)
"+" raises the temperature.
"-" lowers the temperature.
Once set, the temperature display shows "-" until the
temperature inside the fridge reaches +9°C or below.
Allow the cabinet to run for a period of 24 hours
whenever the temperature setting is changed. This
will allow the temperature to stabilise inside the
cabinet.
It is not necessary to reset the temperature when the
cabinet is switched on after it has been out of use.
The thermostat recalls the previously set
temperature.
Temperature inside the fridge
A suitable temperature inside the fridge is approx.
+5°C.
The "Natura-fresh" zone
The temperature in the "Natura-fresh" zone is
constantly just above 0°C. Adjustment by the user is
not necessary.
The "Natura-fresh" zone contains two drawers
separated by a cover.
The lower drawer has a higher humidity of the air is
suited for keeping berries, fruits and vegetables.
The upper drawer is suited for meat, fish and
poultry.
Foodstuffs not suitable to keep in the "Natura-
fresh" zone:
- Cold sensitive fruits like bananas, papaya,
passion fruits, avocado and citrus fruits.
- Cold sensitive vegetables like pimiento, cucumber
courgette, aubergine potatoes and tomatoes.
Fruit and vegetables not yet mellow, like pears.
Pack up all foodstuffs before keeping in the
"Natura-fresh" zone. In this way aroma,
moisture and colour is kept for a longer time.
Suitable packing materials:
Polyethylene airtight bags and wraps;
Plastic containers with lids;
Aluminium foil.
5
5
52
GB
- 18
- 18
Electrolux 818 35 36-03/9
Advertisement
Table of Contents
