Asus MEW-AML User Manual page 23

3. HARDWARE SETUP
11) Wake-On-LAN Connector (3-pin WOL_CON)
This connector connects to a LAN card with a Wake-On-LAN output, such as
the ASUS PCI-L101 Ethernet card. The connector powers up the system when a
wakeup packet or signal is received through the LAN card.
IMPORTANT: This feature requires that your system has an ATX power sup-
ply with at least 720mA +5V standby power.
1
MEW-AML
MEW-AML Wake-On-LAN Connector
12) Serial Port COM 2 Header (10-1 pin COM2)
The optional serial port bracket can be used to add an additional serial port for
additional serial devices.
1
MEW-AML
MEW-AML Serial COM2 Bracket
ASUS MEW-AML User's Manual
IMPORTANT: Requires an ATX power
supply with at least 720mA +5 volt
standby power
+5 Volt Standby PME
Ground
to COM2 Header
Pin 1
23