Hardware Setup Procedure; Layout Contents - Asus MEW-AML User Manual

3. HARDWARE SETUP

3.2 Layout Contents

Motherboard Settings
1) FS0, FS1, FS2, FS3, FS4
Expansion Slots
1) DIMM1, DIMM2
2) Socket 370
3) PCI1, PCI2, PCI3, PCI4
Connectors
1) PS2KBMS
2) PS2KBMS
3) USB
4) PRINTER
5) COM1
6) VGA
7) GAME_AUDIO
8) GAME_AUDIO
9) PRIMARY/SECONDARY IDE p.22 Primary/Secondary IDE Connectors (Two 40-1pins)
10) FLOPPY
11) WOL_CON
12) COM2
13) CPU_FAN, CHA_FAN
14) LED (PANEL)
15) KEYLOCK (PANEL)
16) EXSMI (PANEL)
17) SPEAKER (PANEL)
18) PWRSW (PANEL)
19) HDLED (PANEL)
20) PLED (PANEL)
21) RESET (PANEL)
22) CD_IN
23) ATXPWR

3.3 Hardware Setup Procedure

Before using your computer, you must complete the following steps:
• Check Motherboard Settings
• Install Memory Modules
• Install the Central Processing Unit (CPU)
• Install Expansion Cards
• Connect Ribbon Cables, Panel Wires, and Power Supply
ASUS MEW-AML User's Manual
p.14 CPU External Clock (BUS) Frequency Setting
p.15 168-Pin DIMM Memory Support
p.17 Central Processing Unit (CPU) Socket
p.18 32-bit PCI Bus Expansion Slots
p.19 PS/2 Mouse Connector (6-pin female)
p.19 PS/2 Keyboard Connector (6-pin female)
p.20 Universal Serial Bus Ports 1 & 2 (Two 4-pin female)
p.20 Parallel Port Connector (25-pin female)
p.20 Serial Port COM1 Connector (9-pin male)
p.21 Monitor (VGA) Output Connector (15-pin female)
p.21 Joystick/MIDI Connector (15-pin female) (optional)
p.21 Audio Port Connectors (Three 1/8" female) (optional)
p.22 Floppy Disk Drive Connector (34-1pins)
p.23 Wake-On-LAN Connector (3 pins)
p.23 Serial Port COM2 Header (10-1 pins)
p.24 CPU & Chassis Fan Connectors (Two 3 pins)
p.25 System Message LED (2 pins)
p.25 Keyboard Lock Switch Lead (2 pins)
p.25 System Management Interrupt Switch Lead (2 pins)
p.25 System Warning Speaker Connector (4 pins)
p.25 ATX Power / Soft-Off Switch Lead (2 pins)
p.25 IDE Activity LED (2 pins)
p.25 System Power LED Lead (3-1 pins)
p.25 Reset Switch Lead (2 pins)
p.26 Internal Audio Connector (4-pins) (optional)
p.26 ATX Power Supply Connector (20 pins)
13