Optional Accessory Connection - Kenwood Specifications Quick Start Manual

Table of Contents

Advertisement

Optional accessory connection

DAB antenna CX-DAB1(Optional accessory)
External I/F
3
2
1
1
Rear View Camera Input
2
AV-IN (CA-C3AV; Optional
Accessory) input
3
iPod/ AV-IN2 (CA-C3AV;
Optional Accessory) input
NOTE
• When you connect a rear view camera with
audio output, connect to AV-IN. And select
"Rear Camera" for AV-IN Interface on AV-IN
SETUP screen.
• When you connect a rear view camera
without audio output, connect to Rear View
Camera Input.
• When AV-IN2 Interface is set to "AV-IN2"
on the AV-IN SETUP screen, iPod can be
connected only to the USB terminal using
the KCA-iP102 (Optional Accessory).
5V = 1A
USB terminal (0.8 m)
USB device
(commercially
available)
USB terminal (0.8 m)
27
iPod
(commercially available)
USB maximum
power
supply current
: DC 5 V
1 A
KCA-iP202
(Optional Accessory)
AV Output (1.8m)
Use of a CX-DAB1(optional accessory)
as a DAB antenna is recommended.
When using a commercially available
DAB antenna, the diameter of the SMB
connector must be Φ6.5 mm or less.
Φ 6.5 mm
(maximum)
DNX4230TR

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dnx4230tr

Table of Contents