Connecting Front Panel Cable - AOpen s661FXm-7S Manual

Connecting Front Panel Cable

Attach the power LED, speaker and reset switch connectors to the corresponding
pins. If you enable "Suspend Mode" item in BIOS Setup, the ACPI & Power LED
will keep flashing while the system is in suspend mode.
Locate the power switch cable from your ATX housing, which is a 2-pin female
connector from the housing front panel. Plug this connector to the soft-power
switch connector marked SPWR.
NC
NC
+5V
HDD LED
HDD LED
+5V
+5V
GND
NC
SPEAKER
Front Panel Connector
14
1
Power Switch
GND
Power LED-
GND
Power LED+
NC
GND
GND
RESET
GND