How To Use The Remote Control - Pioneer AVIC-9DVD-II Operation Manual

Pioneer AV equipment which can be combined with the Navigation
System
Refer to page 103 and see "Switching the source" of the AV Head Unit when combined.
➲
See the instruction manuals of AV equipment for the type of CD/DVD the equipment can
play.
➲
For the connection methods, see the installation manuals of AV equipment, or consult the
shop or dealer where you purchased the product.
When resetting AV Head Unit
When pressing the reset button of AV Head Unit while Navigation System and AV
Head Unit (AVH-P6400CD, AVH-P6400R) are combined, make sure that ACC is
tuned OFF. If the reset button is pressed while ACC is ON, it may not work properly.
s How to use the Remote Control
When operating the Pioneer DVD player* combined with the AV Head Unit, switch the
Remote Control operation mode to "AUDIO". When the operation mode is set to "AUDIO",
the operations for pioneer DVD player become possible with this remote control.
*: SDV-P7, AVX-P7300DVD, XDV-P9, XDV-P9
Used when operating audio
1 2 3
5
6
(11), (14) and (15) will be used for DVD operation as well.
98
NAVI/AV
N/A
/FUNC
BACK
, etc.
—
4
8
7
14
MENU
11
15
TOP
MENU