Using Traffic Information - Pioneer ANH-P10MP Operation Manual

Navigation
Notes
• After destination entry, there is a short delay
until the route list is created.
• If the vehicle is "OFF ROAD" at the moment
of destination entry, the route list cannot be
created until a stored road is reached.
Using traffic information
Current traffic announcements can be dis-
played in plain text. There are several options
for requesting current traffic information.
1 Press or
guidance.
: a list of all current traffic information
which is relevant for the calculated route is dis-
played. Refer to When a list appears on page 22.
The scroll marks at the left edge of the list indi-
cate that additional traffic information is availa-
ble. When the route is not set,
appear.
: a list of all currently available traffic
information is displayed. Refer to When a list ap-
pears on page 22.
2 To see more detailed information, se-
lect a desired item from the list and then
press NAVI/OK.
during route
does not
A typical traffic announcement consists of:
• a motorway or road number
• approximate direction information
• detailed location and direction informa-
tion
• the incident
• the cause, if known.
If scroll marks are visible at the left edge of the
display, then more than 3 lines are used to
display the traffic information.
3 Press BACK until the desired display
appears.
Note
If no traffic information is currently available,
"NO TRAFFIC MESSAGES RECEIVED" is dis-
.
played
≠ ≠ ≠ ≠
En
Section
02
37