Table of Contents
Advertisement
RAID Configuration Uitlity
In order to make sure your system can recognize and operate Serial ATA RAID
device smoothly, we have to enter RAID Option ROM to do some configuration.
After finishing the BIOS setup and reboot, you will see [Press CTRL + I to enter
configuration Utility] about half way through the boot up. Please press these two
buttons simultaneously. When you enter you will be presented with a screen as
shown below:
1. Create RAID Volume
This section allows you to set up a name to identify the RAID volume and to
choose the RAID level best suited to your usage mode.
2. Delete RAID Volume
This section allows you to delete a RAID volume. Please be noted that deleting a
volume will destroy the volume data on the drive(s) and cause any member disks
to become available as non-RAID disks.
41
Advertisement
Table of Contents
