Location; Door Reversibility - Electrolux ER 6730 U Installation And Instruction Manual

Location

This appliance is designed to be built-in to a space
having the dimensions given in Fig. 1.
The height of the appliance can be altered if required
by means of adjustable feet situated at its base
(Fig. 2).

Door reversibility

Remove the two screws which fix the upper hinge to
the door.
Carefully lean the appliance on its back and remove
the plastic insert (Fig. 3).
Remove the two screws which fix the lower hinge to
the door.
Remove the four screws which fix the lower hinge to
the base of the appliance and remove the hinge itself;
be very careful to recover all the screws.
Remove the four screws that fix the upper hinge to the
appliance and remove the hinge itself.
Take the hinge removed from the upper part of the
appliance on the opposite side (see Fig. 4), and, using
the screws removed from the lower part, fix it to the
base of the appliance itself.
Remove and refit the other hinge on the upper part of
the appliance on the opposite side.
Fix the two front screws into the upper and lower
hinges (Fig. 4).
Finally, check the alignment of the door and make
sure it closes properly.
After having reversed the opening direction of the
door, discard the original plastic insert removed and
fit the insert supplied with the appliance on the
opposite side.
100-170
D506
D507
D447
D510
Fig. 1
Fig. 2
Fig. 3
Fig. 4
19