Use Of The Appliance; Setting The Water Softener - Electrolux ESF 66060 User Manual

6 electrolux
Digital display
The display shows:
• adjusted level of the water softener,
• activation/deactivation of the rinse aid
dispenser (only with multitab function on),
• program duration,
• remaining time to the end of the pro-
gram,
• end of a washing program,
• number of hours in delay start,
• fault codes.
Function buttons
Use the function buttons for these opera-
tions:
• to set the water softener. Refer to 'Set-
ting the water softener'.
• to deactivate/activate the rinse aid dis-
penser when multitab function is active.
Refer to 'Multitab function'.

USE OF THE APPLIANCE

Refer to specified instructions for each step
of the procedure.
1. Check if the water softener level is cor-
rect for the water hardness in your area.
If necessary set the water softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse aid.

SETTING THE WATER SOFTENER

The water softener removes minerals and
salts from the water supply. Minerals and
salts can have bad effect on the operation
of the appliance.
Water hardness is measured in equivalent
scales:
• mg/I (millimol per litre)
Water hardness
mg/l
910 - 1250 910 - 1250
760 - 909 760 - 909
650 - 759 650 - 759
510 - 649 510 - 649
400 - 509 400 - 509
330 - 399 330 - 399
260 - 329 260 - 329
190 - 259 190 - 259
ppm mmol/l
9,1 - 12,5
7,6 - 9,0
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
• to cancel the washing program in pro-
gress or a delay start in progress. Refer
to 'Select and start a washing program'.
Setting mode
The appliance is in setting mode when all
program indicator lights are on.
The appliance must be in setting mode for
these operations:
– to set a washing program,
– to set the water softener level,
– to deactivate/activate the rinse aid dis-
penser.
If a program indicator light is on, cancel the
program to go back to the setting mode.
Refer to 'Select and start a washing pro-
gram'.
4. Load cutlery and dishes into the dish-
washer.
5. Set the correct washing program for the
type of load and soil.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing program.
• ppm (parts per million),
• mmol/l (millimol per litre - international
unit for the hardness of water).
Adjust the water softener in to the water
hardness in your area. If necessary, contact
your local water authority.
Water hardness setting
manually
2
2
2
2
2
2
1
1
electronically
10
9
8
7
6
5
4
3