Electrolux ESF 66060 User Manual page 17

problem yourself, contact your dealer or the
Customer Care Centre.
Malfunction
The appliance the digital display shows
does not fill
with water
The appliance the digital display shows
does not drain
the water
The anti-flood the digital display shows
device oper-
ates
The program
does not start
After the check, switch on the appliance.
The program continues from the point of in-
terruption. If the malfunction shows again,
contact your Customer Care Centre.
If the display shows a fault code, not de-
scribed in the chart, contact your Customer
Care Centre.
These data are necessary to help you
quickly and correctly:
Fault code
The water tap is blocked
or restricted with lime-
scale.
The water pressure is too
low.
The water tap is closed.
The filter in the water inlet
hose is blocked.
The installation of the wa-
ter inlet hose is not cor-
rect. The hose can be
kinked or squashed.
There is a blockage in the
sink spigot.
The installation of the wa-
ter drain hose is not cor-
rect. The hose can be
kinked or squashed.
The appliance door is not
closed.
Mains plug is not connec-
ted.
The fuse has blown out in
the household fuse box
The delay start is set.
Warning! Switch the appliance off
before you do the suggested corrective
actions.
Possible cause
For these data, refer to the rating plate.
Write the necessary data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
electrolux 17
Possible solution
Clean the water tap.
Contact your local water
authority.
Open the water tap.
Clean the filter.
Make sure that the instal-
lation is correct.
Clean the sink spigot.
Make sure that the instal-
lation is correct.
Close the water tap and
contact your Customer
Care Centre.
Close the door.
Plug-in appliance to the
mains.
Replace the fuse.
If you want to cancel the
delay start, refer to 'Se-
lect and start a washing
program'.
....................
....................
....................