Connecting The Handset - Cisco SPA50X User Manual

Installing Your Phone

Connecting the Handset

Connecting the Handset
STEP 1
!
CAUTION
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
Numbered objects in
# Description
1 Auxiliary port. (For use only with the Cisco Attendant Console.)
2 Upper slots.
3 Lower slots.
4 PC port.
5 Network (switch) port.
6 Cable run.
7 Handset port.
8 Power port. (Use only with a Cisco PA100 power adapter.)
Turn the phone body over to expose the ports on the back of the device.
Do not insert a telephone line cord into the auxiliary (AUX) port.
Insert the long end of the phone cord into the handset port on the phone body that
is marked with a phone symbol.
(Optional) Route the phone cord through the cable slot.
Insert the other end of the phone cord into the port at the bottom of the handset
(not shown).
Figure 1 are described in the following table.
2
18