LG -C195N User Manual page 28

Safety
made at different laboratories on the same
phone. SAR is the measurement of the amount
of energy absorbed in tissue, either by the
whole body or a small part of the body. It
is measured in watts/kg (or milliwatts/g) of
matter. This measurement is used to determine
whether a wireless phone complies with safety
guidelines.
9. What steps can I take to reduce my
exposure to radio frequency energy from
my wireless phone?
If there is a risk from these products — and at
this point we do not know that there is — it is
probably very small. But if you are concerned
about avoiding even potential risks, you can
26
take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since
time is a key factor in how much exposure
a person receives, reducing the amount of
time spent using a wireless phone will reduce
RF exposure. If you must conduct extended
conversations by wireless phone every day, you
could place more distance between your body
and the source of the RF, since the exposure
level drops off dramatically with distance.
For example, you could use a headset and
carry the wireless phone away from your
body or use a wireless phone connected to
a remote antenna. Again, the scientific data
do not demonstrate that wireless phones are