Siemens S7-200 System Manual page 112

Operating Your Text Display (TD) Device
5.5 Viewing the Screens and the Alarms
Figure 5-8
Displaying the Alarms
If you created both screens and alarms when you configured the TD device, the main menu
of the TD device includes a command that allows you to access the secondary (non-default)
display. The TD device always returns to the default display mode after a period of inactivity.
As shown in the TD 200C example in the figure below, the main menu provides a Display
Alarms command for the default TD configuration. If you configured alarms as the default
display, the main menu lists a User Menu entry.
After displaying the alarms, you use the UP and DOWN arrows to scroll through the
sequential list of alarms.
112
TD 100C - Navigating between the Default and Secondary Displays
Text Display (TD) User Manual
System Manual, 08/2008, A5E00765548-03