Smart Touch Control; Inserting The Batteries (Aaa X 2); Connecting To The Tv - Samsung LED 7450 User Manual

Smart Touch Control

The Smart Touch Control makes it easier and more convenient to use the TV. For example, you can
use the remote panel's built-in touch pad to move the focus and make selections as you would on a
computer using a mouse. In addition, you can use the virtual remote panel displayed on the screen to
change channels, play media files, and access favorites.

Inserting the Batteries (AAA X 2)

11
Slightly lift the battery cover by pulling the strap or using a plastic card. Next, pull on the cover's
notch with a fingernail to remove the cover completely.
"
Check the location of the battery cover groove. The groove's location may vary depending on the type
of Smart Touch Control is provided with the product.
21
Insert 2 AAA batteries, making sure to align the positive and negative ends correctly.
31
Align the battery cover with the back of the remote panel and press down along the edges until it
is cleanly attached to the remote panel.

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must first pair it to the TV via Bluetooth.
However, the Smart Touch Control is only available for the paired Samsung TV.
"
We recommend to use the Smart Touch Control in less than 20ft(6m). A usable distance may differ
depending on the wireless environmental conditions.
11
To turn on the TV, point the Smart Touch Control at the remote panel receiver of the TV and
TV
press the button. The remote panel receiver's location may vary depending on the model.
21
A Bluetooth icon will appear at the bottom left of the screen as shown below. The TV will then
attempt to connect to the Smart Touch Control automatically.
<Attempting to connect and completion icons>