Signal Information; Picture Test; Sound Test; Voice & Motion Control Environment Check - Samsung LED 7450 User Manual

Picture Test

Support
Screen Menu >
The Picture Test displays a high definition picture to examine it for flaws or faults.
If the test picture does not appear or there is noise or distortion, the TV may have a problem. Contact
Samsung's Call Center for assistance. If the test picture is displayed properly, there may be a problem
with the external device. Please check the connections. If the problem persists, check the signal
strength or refer to the external device's user manual.

Sound Test

Support
Screen Menu >
Use the built-in melody to check for sound problems.
If no melody is played by the TV's speakers, make sure
try again. If the problem persists, there may be a problem with the TV. Contact Samsung's Call Center
for assistance. If the melody is played, there may be a problem with the external device. Please check
the connections. If the problem persists, refer to the external device's user manual.
"
The UN85S9VF model has no built-in speaker. Be sure to connect an audio device to the UN85S9VF model
for audio output.
Voice & Motion Control Environment Check
Support
Screen Menu >
Test the ambient noise and brightness levels to see if they are suitable for SMART Interaction use.
"
This function is not available on the UN85S9VF model.

Signal Information

Support
Screen Menu >
The signal Information displays the digital channel signal information and strength. Users can then
adjust the antenna to increase the signal strength and receive HD channels. This option is only
available for digital channels.
Reset
Support
Screen Menu >
This resets all settings to the factory default settings except for the network settings. Select Reset,
enter the PIN code when requested, and then select Yes. All settings are then reset. The TV turns off
and on again automatically and then displays the
TV, refer to the user manual that came with the TV.
Self Diagnosis Picture Test
> >
Self Diagnosis Sound Test
> >
Self Diagnosis Voice & Motion Control Environment Check
> >
Self Diagnosis Signal Information
> >
Self Diagnosis Reset
> >
Try Now
Try Now
Speaker Select
Try Now
Try Now
Setup
screen. For more information on resetting the
TV Speaker
is set to and then