Standby Control; Lamp Schedule - Samsung ED65C User Manual

General
Max. Power Saving
Game Mode
Auto Power
Safety Lock

Standby Control

Lamp Schedule

- The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
On
Auto
•
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
Off
The message
Off
On
•
Power-saving mode will activate if no input signals are detected.
Off
Off
•
The message
Off
― The
Off
― If
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
Off
•
No Signal will appear if no source device is connected.
No Signal will appear if no input signals are detected.
Standby Control option is only enabled when
No Signal is displayed although a source device is connected, check the cable connection.
/ On
Source List is set to PC, HDMI.
116